Non-destructive optical analysis of your samples, feasibility study to measurement report

You have a sample and a question about it. We measure it on an optical microscope we designed and built ourselves, and we tell you what the measurement says.

What you receive:

• Optical measurement of your sample, performed in our laboratory in Limoges

• 3D reconstruction of the surface

• A written measurement report

• Our reading of the result, from the scientists who ran it

One rule governs everything we do: non-destructive and non-invasive. No contact, no marking, no sample preparation, no vacuum and no coating, at ambient conditions, on any material including transparent and reflective ones. Your sample leaves our laboratory exactly as it arrived, and can go back into production or into the next test.

How it starts. Before any full analysis, we run a Proof of Feasibility: one short, bounded step that answers a single question, whether your measurement is possible and under what conditions. You commit to the full work only once that answer exists.

When a case has no standard protocol, we design the analysis and the optical setup for it. That is our own instrument, built by us, so the illumination, the acquisition sequence and the processing are ours to change.

Reach out with your sample and your question.