SmallSat Europe

27–28 May 2025 | Amsterdam, Netherlands

ProductUpdated on 7 May 2025

ADS-B Receiver

Esben Bach

Business Development Manager at Satlab A/S

Aalborg, Aalborg, Denmark

About

The Satlab Polaris ADS-B is a fully self-contained software-defined radio receiver for 1090 MHz ADS-B messages, with integrated demodulator and storage.

This versatile SDR offers excellent performance given the typical size, weight and power constraints of a CubeSat - or as an additional payload on larger LEO satellites.

The Polaris ADS-B receiver is built on Satlab’s second generation SDR platform, based on the in-orbit experience gained from the QubeAIS receiver, which has flown on several missions since 2013.

The Polaris ADS-B is part of our Polaris SDR product line that has demonstrated reliable flight heritage since 2019, with over 100 units successfully delivered to customers around the world for a multitude of space missions. With a TRL of 9, it is fully qualified and operational in its intended environment.

Features

  • Covers the 1090 MHz band

  • Possible to download raw IF spectrum samples

  • 128 MB primary data storage and 1 GB secondary storage

  • 1.5 W average power consumption

  • Low-IF receiver with 16-bit I/Q ADC

  • LNA and SAW filters onboard

  • Delivered with SW library for easy integration

  • CubeSat Space Protocol (CSP) compatible

  • CAN, Ethernet and RS-422 connectivity

  • Input voltage 4.5 to 40 V

  • CSK-compatible form factor

  • SMP antenna connector

  • ESD protection on all interfaces

Key Parameters

  • Frequency band: 1090 MHz

  • ADS-B message types: DF 17 & 18

  • Sensitivity: -102 dBm (80% reception rate)

  • Noise figure: <2 dB

  • Maximum message rate: 8333 messages/second

  • Frame store capacity: 1048576 frames

  • Input voltage: 4.5 - 40 V

  • Typical power consumption: 1500 mW (5 V input, 25℃)

  • Operating temperature: -40℃ to +85℃

  • CAN-bus: Up to 1 Mbit/s

  • RS-422: Full duplex, up to 3 Mbit/s

  • Ethernet: Full duplex, 100 Mbit/s

  • Primary storage: 128 MB NOR-flash

  • Secondary storage: 1 GB SLC SD card

  • Dimensions: 93.0 x 87.2 x 12.5 mm

  • Mass: 185 g

Qualification status

  • Thermal soak: -40 to +85℃

  • Vibration testing: 14.1 Grms

  • TID: 20 krad(Si) board level

Applies to

  • 🚀 Technical & Engineering
  • 🌍 Earth Observation & Remote Sensing
  • 📡 Communications & Networking
  • 🔄 Manufacturing & Supply Chain

Organisation

Similar opportunities

  • Product

    LoRa Receiver

    • 🚀 Technical & Engineering
    • 🔄 Manufacturing & Supply Chain
    • 🌌 Space Environment & Operations
    • 🌍 Earth Observation & Remote Sensing

    Esben Bach

    Business Development Manager at Satlab A/S

    Aalborg, Aalborg, Denmark

  • Product

    4-channel AIS Receiver

    Esben Bach

    Business Development Manager at Satlab A/S

    Aalborg, Aalborg, Denmark

  • Product

    Full-duplex S-band Transceiver (SRS-3)

    • 🚀 Technical & Engineering
    • 🔄 Manufacturing & Supply Chain

    Esben Bach

    Business Development Manager at Satlab A/S

    Aalborg, Aalborg, Denmark