Sheet Metal Roofing and Facade Systems

Products, services:

Services:

• Tinsmith work: drainage and edging of industrial, residential and non-residential buildings

• sheet metal roofing: strip and slab sheet metal roofing on modern and listed buildings

• slate roof insulation: waterproofing of slate roofs and substructures, using PVC, FPO, bitumen and kent insulation technologies

• assembled facade cladding: small slabs and large slabs of metal sheet, composite sheet, fibre cement, HPL panels, in accordance with modern requirements

• thin sheet processing: edge bending up to 8.2 m, slitting and slab cutting up to 2 mm thickness from rolls of up to 5 tonnes, profiling, punching, cutting

Products:

• edge folded products: cornice cladding, attic cladding, fascia board, gable end, wall cornice, storm slats, zaluzia cabinet, shutter box, lath and batten sheet metal cladding, mirror cladding, rhombus cladding, foil tiled eaves and drip mouldings, hall mouldings, starter profile, omega, attic, corner nailing, door and window mouldings, casings, boxes, trays, ventilation shutters

• profiled products:

• 25 mm double standing seam for roofing; further machining of these: straight and curved seam end trimming, making bends and rebends, arching on bellows from radius r 500

• 25 mm click cover for roofing; further machining: trimming of cork ends, bending and folding

• 25 mm shadow joint strip cladding ( steckfalz panel ); further machining: trimming of ends, boxing, this technology can also be used to produce slab cladding

Know-how and technologies:

• profiling, slabbing, rolling, punching, punching, cutting

The thin sheet machining used by the company is very efficient and economical, as a large part of the raw materials is machined from strip sheet. Both slitting lines are capable of handling 6 sheet rolls at the same time, thus reducing the time needed for roll changes. Both slitting lines can simultaneously straighten, slit and slab, so you can have a straightened slab within minutes. From there, it’s just a matter of driving the products on NC and CNC bending machines and they are ready to be packaged.

They can machine strip sheet up to 2 mm thick. In 1 mm thickness they can edge bend up to 8,2 m length, in 1,5 mm thickness up to 6,4 m length, in 2 mm thickness up to 4 m length.

Even with its current technologies, the company already has a unique portfolio in Hungary in the field of thin sheet machining, which it expands with CNC punching technology.

www.stangbadogos.hu